OK 48.00

ESAB welding systems offer outstanding MMA performance. If history proves anything, ESAB OK48.00 is the preferred electrode choice for low-hydrogen welding.

• Next-generation E7018-H4R formulation engineered to decrease moisture pick-up in high humidity conditions.
• Complete slag coverage provides easy removal and minimal post weld clean-up
• Available in ESAB's VacPac™ vacuum packaging for optimum protection against moisture pick-up without the need for costly rebake procedures or special handling

PRODUCT INFORMATION

OK 46.00

OK 46.00 is the best all-around rutile electrode available: An E6013 electrode that is relatively insensitive to rust or other surface impurities.

• Smooth weld beads in all positions, including vertical down
• Very easy to strike and restrike, making it ideal for short welds, root runs and tacking
• Easy to remove slag

PRODUCT INFORMATION

OK 61.30

ESAB welding systems offer industrial-grade performance with all MMA electrodes, including extra-low carbon electrodes such as OK 61.30 (E308L-17).

• Suitable for welding steels of the 19% Cr - 10% Ni type.
• Also suitable for welding stabilized stainless steels of similar composition (except when full creep resistance of the base material is to be met)
• Extra low carbon (0.03%) content helps reduce risk of intergranular corrosion
• Slag is virtually self-cleaning
• Designed to weld stainless types 304, 304L, 321 and 347 for corrosion service at temperature up to about 350ºC

PRODUCT INFORMATION

OK AristoRod 12.50

ESAB inverters offer the smoothest MIG arc in the business. Make it even better with AristoRod 12.50, the smoothest feeding MIG wire you'll ever run.

• High-efficiency non-copper coated wire with advanced surface characteristics.
• Superior feeding performance for better arc stability and lower spatter
• Excellent arc ignition
• Promotes longer torch liner and GMAW consumables life
• Fluid weld puddle with superb wetting action
• Extra low fume emissions

PRODUCT INFORMATION

OK Autrod 12.51

ESAB welders give you superior control over the MIG arc. Use OK Autrod 12.51 to gain even more control over the weld puddle and bead profile

• A copper-coated solid wire that provides a more fluid puddle and smoother bead profile.
• Superior wire surface condition reduces copper flakes compared to low-cost wires
• Carefully controlled chemistry for consistent mechanical properties

PRODUCT INFORMATION

OK Autrod 308LSi

Use Rebel's inductance function for a more fluid puddle when welding stainless steel, and use OK Autrod 308LSi to further enhance wetting, reduce weld crown and improve tie-in.

• A chromium-nickel wire for welding austenitic chromium-nickel alloys of the 18% Cr -  8% Ni type.
• Low carbon typical 0.01% content helps reduce risk of intergranular corrosion
• Higher silicon typical 0.9% improves welding properties such as wetting, bead profile and tie-in at weld toe
• Good general corrosion resistance
• Widely used in chemical and food processing industries, as well as for pipes, tubes and boilers

PRODUCT INFORMATION

OK Autrod 316LSi

OK Autrod 316LSi offers improved corrosion resistance in acid and chlorinated environments. A chromium-nickel-molybdenum wire for welding austenitic stainless alloys of the 18% Cr - 8% Ni and 18% Cr -10% Ni - 3% Mo types.

• Low carbon typical 0.01% content helps reduce risk of intergranular corrosion
• Higher silicon typical 0.9% improves welding properties such as wetting, bead profile and tie-in at weld toe
• Widely used in chemical and food processing industries, as well as shipbuilding and architectural structures

PRODUCT INFORMATION

Coreshield^® 15

All ESAB inverters deliver a stable arc, and the availability of Coreshield 15 (E71T-GS) in 0.8mm makes them a superior choice welding on galvanized steel and thin sheet. An all-position, self-shielded wire for single-pass Flux-Cored welding.

• Produces smooth arc action, full slag coverage, easy slag removal, and low spatter
• Requires no gas cylinder, which makes it ideal for portable applications
• Particular suitable for thin gauge materials (0.8 - 5.0mm)
• Tolerates light rust and mill scale
• Excellent for use on lap and fillet welds on thin galvanised steel

PRODUCT INFORMATION

OK Tubrod 15.14

ESAB inverters provide exceptional arc characteristics, and OK Tubrod 15.14 (E71T-1) provides exceptional running characteristics in the spray transfer mode with both Argon/CO2 and 100% CO2.

• An all-position, wire suitable for many mild- and medium-tensile structural steel applications
• Universally approved to grade 3 by all major authorities

PRODUCT INFORMATION

Filarc PZ6500

A copper coated, manganese-silicon alloyed rod for GTAW of all general engineering and structural steels with a minimum yield strength of max 420 MPa. The rod is usually welded with pure argon (I1) as the shielding gas.

PRODUCT INFORMATION

OK Tigrod 12.61

OK Tigrod 12.61 is a copper-coated Mn-Si-alloyed W3Si1/ER70S-6 solid rod for the GTAW of non-alloyed steels, as used in general construction, pressure vessel fabrication and shipbuilding.

PRODUCT INFORMATION

OK Tigrod 316L

OK Tigrod 316L is a corrosion resisting chromium-nickel-molybdenum welding rods for welding of austenitic stainless alloys of 18% Cr - 8% Ni and 18% Cr - 10% Ni - 3% Mo-types. The alloy is widely used in the chemical and food processing industries as well as in shipbuilding and various types of architectural structures.

PRODUCT INFORMATION