Filarc 98S

ESAB

Filarc 98S

The following items have been added to your list


x

All-positional, low-hydrogen electrode for welding higher strength steels, depositing weld metal with a minimum yield strength of 550 N/mm2 after stress relieving.

BUY NOW


Typical Charpy V-Notch Properties

Impact Value Testing Temperature
pwht iso
80 J (59 ft-lb) 1 hr 580 degC (1076 degF) -50 degC (-58 degF)
60 J (44 ft-lb) 1 hr 580 degC (1076 degF) -60 degC (-76 degF)

Typical Tensile Properties

ConditionElongationShielding GasTensile Strength Testing Temperature Testing TimeYield Strength
PWHT21 %ISO710 MPa (103 ksi)580 degC (1076 degF)1 hr650 MPa (94 ksi)

Deposition Data

Current Fusion time per electrode at 90% I max Deposition Rate @ 90% I max Diameter Deposition Efficiency (%) Number of electrodes/kg weld metal Voltage
55-85 A 60 sec 0.72 kg/h (1,6 lb/h) 2.5 x 350.0 mm (0.098 x 13,8 in.) 60 % 83.3 24.4 V
80-140 A 68 sec 0.94 kg/h (2,1 lb/h) 3.2 x 350.0 mm (1/8 x 13,8 in.) 55 % 56.6 23.3 V
120-180 A 103 sec 1.43 kg/h (3,2 lb/h) 4.0 x 450.0 mm (5/32 x 17,7 in.) 60 % 24.4 24.0 V

Classifications

Classifications SFA/AWS A5.5 : E9018-G
EN ISO 18275-A : E 55 6 Mn1NiMo B T 32 H5

Approvals

Approvals ABS E9018-G
NAKS/HAKC 3.2 - 4.0 mm
Seproz UNA 272581
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type Low alloyed (0.9 % Ni, 0.3 % Mo)
Coating Type Basic covering
Diffusible Hydrogen < 5.0 ml/100g
Welding Current AC, DC+-

Typical Weld Metal Analysis %

Typical Weld Metal Analysis %
C Cr Mn Mo Ni Si
0.06 % 0.05 % 1.85 % 0.32 % 0.89 % 0.35 %
x

Part Numbers and Accessories

Part Numbers : Filarc 98S
77772539K3 FIND A DISTRIBUTOR
77773239G3 FIND A DISTRIBUTOR
77774049G3 FIND A DISTRIBUTOR
x
x

x

Loading..