Coreweld 46 LS

ESAB

Coreweld 46 LS

The following items have been added to your list


x

Coreweld 46 LS is a new generation metal cored wire based on ESAB’s revolutionary cored wire surface technology. It has been developed for the welding of thin-plate with a minimum thickness of 1.0 mm and provides fabricators with a substantially faster and higher quality welding solution to solid MAG wire. The absence or very low levels of silica on the weld surface and minimal spatter result in reduced post weld cleaning before coating/painting. Coreweld 46 LS is a unique product that markedly lowers the welding costs for mechanised and robotic fabrication. The many advantages relative to solid wire are associated with the extremely wide spray arc parameter envelope that starts as low as 160A. With solid wire spray arc starts at around 200A for diameter 1.0 mm and 230A for diameter 1.2 mm. These features are valid for the standard shielding gas M21 (Ar + 15-25% CO2), although optimal results are obtained in 92% Ar + 8% CO2 mixtures. Switching from solid wire to Coreweld 46 LS will in most cases, require no change in the positioning of the welding gun so the conversion time is limited to the optimisation of welding parameters.

BUY NOW


Typical Charpy V-Notch Properties

As Welded
Impact Value 53 ft-lb
Impact Value 72 J
Testing Temperature -40 °F
Testing Temperature -40 °C

Typical Tensile Properties

ConditionElongationTensile Strength Yield Strength
As Welded29 %545 MPa (79 ksi)485 MPa (70 ksi)

Deposition Data

Current Deposition Rate Diameter Voltage Wire Feed Speed
100-360 A 1.3-8.0 kg/h (2-17 lb/h) 1.2 mm (0.045 in.) 16-32 V 1.8-13.0 m/min (71-512 in./min)
150-380 A 1.8-7.0 kg/h (4-15 lb/h) 1.4 mm (0.052 in.) 18-34 V 2.5-9.0 m/min (98-354 in./min)
150-450 A 1.7-7.8 kg/h (3-17 lb/h) 1.6 mm (1/16 in.) 17-36 V 2.0-9.3 m/min (79-366 in./min)

Classifications

Weld Metal EN ISO 17632-A : T 46 4 M M20 2 H5
EN ISO 17632-A : T 46 4 M M21 2 H5
SFA/AWS A5.18 : E70C-6M H4

Approvals

Approvals ABS 4Y40M H5 (M20 & M21)
(1.2mm) : BV 4Y40 H5 (M20 & M21)
CE EN 13479
(1.2mm) : DB 42.039.38
DNV IV Y40MS(H5) (M20 & M21)
(1.2mm) : GL 4Y40H5S (M20 &M21)
NAKS/HAKC 1.2MM
(1.2mm) : VdTÜV 12152
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type C Mn steel
Diffusible Hydrogen < 4 ml/100g
Welding Current DC+

Typical Weld Metal Analysis %

Typical Weld Metal Analysis %
C Mn Ni Si
0.04 % 1.25 % 0.35 % 0.63 %
x

Part Numbers and Accessories

Part Numbers : Coreweld 46 LS
35LS127730 FIND A DISTRIBUTOR
35LS12773V FIND A DISTRIBUTOR
35LS129310 FIND A DISTRIBUTOR
35LS129370 FIND A DISTRIBUTOR
35LS1293XX FIND A DISTRIBUTOR
35LS129430 FIND A DISTRIBUTOR
35LS12560V
35LS147730 FIND A DISTRIBUTOR
35LS149310 FIND A DISTRIBUTOR
35LS149370 FIND A DISTRIBUTOR
35LS1493XX FIND A DISTRIBUTOR
35LS167730 FIND A DISTRIBUTOR
35LS169310 FIND A DISTRIBUTOR
x
x

x

Loading..