OK Tigrod 13.12

ESAB

OK Tigrod 13.12

The following items have been added to your list


x

OK Tigrod 13.12 is a 1.0Cr-0.5Mo-alloyed, copper-coated rod for the GTAW of creep-resistant steels of the same type, such as pipes in pressure vessels and boilers. The rod can also be used for welding low-alloyed, high strength steels with a minimum tensile strength of 550 MPa.

BUY NOW


Typical Charpy V-Notch Properties

Impact Value Testing Temperature
as welded ar (i1) aws
50 J (37 ft-lb) -20 degC (-4 degF)
40 J (30 ft-lb) -30 degC (-22 degF)
20 J (15 ft-lb) -40 degC (-40 degF)
20 J (15 ft-lb) -60 degC (-76 degF)
120 J (89 ft-lb) 20 degC (68 degF)
stress relieved ar (i1) en iso
120 J (89 ft-lb) 1 hr 700 degC (1292 degF) -40 degC (-40 degF)
250 J (185 ft-lb) 1 hr 700 degC (1292 degF) 20 degC (68 degF)

Typical Tensile Properties

Condition As Welded Stress Relieved
Shielding Gas Ar (I1) AWS Ar (I1) EN ISO
Tensile Strength 720 MPa (104 ksi) 650 MPa (94 ksi)
Yield Strength 560 MPa (81 ksi) 560 MPa (81 ksi)
Elongation 24 % 25 %
Testing Time 1 hr
Testing Temperature 700 degC (1292 degF)

Classifications

Wire Electrode SFA/AWS A5.28 : ER80S-G
EN ISO 21952-A : W CrMo1Si
EN ISO 21952-B : W 55 I1 1CM3

Approvals

Approvals CE EN 13479
NAKS/HAKC 1.6-2.4 mm
VdTÜV 04952
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type Low alloyed steel (1 % Cr - 0.5 % Mo)

Typical Weld Metal Analysis %

Typical Weld Metal Analysis %
C Cr Mn Mo P S Si
0.10 % 1.10 % 1.00 % 0.50 % 0.015 % 0.015 % 0.70 %
Typical Wire Composition %
0.09 % 1.18 % 1.00 % 0.49 % 0.015 % 0.010 % 0.65 %
x

Part Numbers and Accessories

Part Numbers : OK Tigrod 13.12
131216R150 FIND A DISTRIBUTOR
131220R150 FIND A DISTRIBUTOR
131224R150 FIND A DISTRIBUTOR
131232R150 FIND A DISTRIBUTOR
x
x

x

Loading..