Shield-Bright 309L X-tra
FCAW wire for 22%Cr - 12%Ni stainless steel For flat and horizontal position welding. Developed to be used when welding most mild or carbon steels to type 304. The higher percentages of Cr and Ni provide the necessary crack resistance. Carbon content 0.04% maximum.
Typical Charpy V-Notch Properties
| as welded c1 shielding gas | ||||
Typical Tensile Properties
| Condition | As Welded | As Welded |
| Shielding Gas | M21 Shielding Gas | C1 shielding gas |
| Tensile Strength | 600 MPa (87 ksi) | 546 MPa (79 ksi) |
| Yield Strength | 480 MPa (70 ksi) | 410 MPa (59 ksi) |
| Elongation | 35 % | 38 % |
Deposition Data
| Current | Deposition Rate | Diameter | Voltage | Wire Feed Speed |
| 200-350 A | 3.0-7.5 kg/h (6.6-16. lb/h) | 1.6 mm (1/16 in.) | 26-34 V | 4.0-11.0 m/min (157-433 in./min) |
| 150-250 A | 2.5-7.0 kg/h (5.5-15. lb/h) | 1.2 mm (0.045 in.) | 25-32 V | 8.0-16.0 m/min (315-630 in./min) |
Classifications
| Weld Metal |
SFA/AWS A5.22 : E309LT0-1 SFA/AWS A5.22 : E309LT0-4 KS D 3612 : YF-309LC EN ISO 17633-A : T 23 12 L R C1 3 EN ISO 17633-A : T 23 12 L R M21 3 JIS Z 3323 : YF-309LC |
Approvals
| Approvals |
ABS E309LT0-1 (C1) BV 309L (C1) CCS 309LS (C1) CE EN 13479 CWB AWS A5.22 E309LT0-1, E309LT0-4 DNV 309L MS (C1) DNV 309L MS (M21) VdTÜV 06594 |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | C Cr Ni |
| Shielding Gas | M21, C1 (EN ISO 14175) |
| Welding Current | DC+ |
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| C | Cr | Mn | Ni | P | S | Si | ||||||||
| 100% CO2 | ||||||||||||||
| 0.032 % | 24.50 % | 1.46 % | 12.8 % | 0.021 % | 0.004 % | 0.66 % | ||||||||
| 75% Ar - 25% CO2 | ||||||||||||||
| 0.030 % | 24.50 % | 1.44 % | 13.0 % | 0.020 % | 0.004 % | 0.80 % | ||||||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.